Skip to Main Content
Canadian
Canadian owned and operated

106593 - Drum Belt 5-3/8"x11 5/8x3 1/2" Medium Grit

Packaging: 10 per box
$36.28/ea $226.80/10 per box only $22.68/eaSave 37%

Usually ships within 3-5 business days

SKU: VSM106593 Categories: ,

OVERVIEW

Additional Information
Packaging Description:10 per box
Used to Sand:Metal or Wood
Width (in):1.5"
Length (in):50"
Grit:MEDIUM
Brand:VSM
----- new values below ----
Product Type:Drum Belt
Compatible Drum Diameter:3-1/2"
Application:Finishing, Blending, Satin Finishing
Material Compatibility:Stainless Steel, Steel, Non-Ferrous Metals
brand:VSM
grit:MEDIUM
width-in:5-3/8"
length-in:11-5/8"
used-to-sand:Steel or Stainless or Aluminum

INCLUDED

  • 1 x VSM Medium Grit Drum Belt (5-3/8" x 11-5/8")

APPLICATIONS

  • Creating linear satin or brushed finishes on stainless steel.
  • Blending weld seams and fabrication marks.
  • Removing rust, oxidation, and coatings.
  • Surface preparation prior to painting or polishing.
  • General cleaning and conditioning of metal surfaces.

FAQ

This belt is sized 5-3/8" x 11-5/8" and is designed to fit linear finishing tools (burnishers) equipped with a 3-1/2" diameter expansion roller.

Medium grit typically refers to an intermediate level of coarseness, ideal for blending surface imperfections and creating a satin finish, rather than heavy stock removal.

Yes, this VSM drum belt is suitable for use on aluminum, as well as steel and stainless steel. Ensure you clean the surface to prevent loading.

While some abrasive belts can be used wet, this specific belt is generally designed for dry operation. Check the specific product packaging for wet/dry ratings.

Slide the belt over the deflated expansion roller of your burnisher. Once in place, the centrifugal force or mechanical expansion of the roller will secure the belt during operation.

The primary application is linear finishing, specifically for creating uniform scratch patterns (satin finish) and blending on metal surfaces.

No, a Medium grit drum belt is for finishing and blending. For removing heavy weld beads, you should start with a coarser grit (e.g., 36 or 60) ceramic belt before switching to this one.

The belt measures 5-3/8 inches in width and 11-5/8 inches in length (circumference).