Sorry, product has been discontinued by the vendor.
The ESAB 19265 Drive Roll Cap W/HDWR is an essential replacement component designed to maintain the precision and reliability of your welding wire feeder. In any MIG or flux-cored welding operation, the wire feed mechanism is the heartbeat of the system. The drive rolls are responsible for pushing the welding wire through the liner to the contact tip, and their stability is governed by the drive roll cap. This specific assembly acts as the retaining lock, ensuring that the drive rolls remain perfectly seated on the drive shaft, preventing lateral movement that could disrupt the wire path.
Over time, the constant vibration of industrial welding environments and the repetitive torque of changing wire spools can take a toll on small components. Threads on retaining caps can strip, or the cap itself can become rounded or lost. A compromised drive roll cap leads to loose drive rolls, which causes wire slippage, erratic arc starts, and the dreaded "birdnesting" of wire at the feeder inlet. By installing a fresh ESAB 19265 cap, you ensure that the pressure applied to the wire is consistent and that the rolls spin true, restoring the smooth feeding characteristics your machine was designed to deliver.
This product is supplied as a complete kit, indicated by the "W/HDWR" (with hardware) designation. It typically includes the cap itself along with the specific retaining screw or bolt required for installation. This is a significant advantage for maintenance personnel, as it eliminates the need to source matching thread pitches or washer sizes separately. Whether you are performing a scheduled overhaul of your wire feeder or conducting an emergency repair on the shop floor, having the correct hardware included ensures the job is done right the first time.
Designed specifically for compatible ESAB wire feeders, this part guarantees a factory-correct fit. Generic substitutes often fail to secure the rolls tightly or may have incorrect thread depths that can damage the drive shaft. Using genuine ESAB parts protects your equipment investment. Installation is simple: ensure the machine is powered down, remove the old cap, clean the shaft of any metal dust or debris, slide your drive rolls into position, and secure them firmly with the new 19265 cap. Proper tightness is key—secure enough to prevent loosening from vibration, but not so tight as to strip the threads.
Regular inspection of your wire feeder's "consumable" hard parts, like this cap, is a best practice that prevents downtime. Keep a spare ESAB 19265 in your maintenance locker to ensure your production lines keep moving without interruption.
| Additional Information |
|---|
| Packaging Description:pack of 1 |
| Product Type:Drive Roll Cap |
| Includes:Cap, Mounting Hardware |
| Application:Wire Feeder Maintenance |
