Canadian
Canadian owned and operated
Welders Helper
cart
Canada’s Premier Online Welding Supply Shop!
Awaiting product image

171115-002 - ESAB / Tweco .035 V-Groove Drive Roll for Fabricator Series

Packaging: 1 per ea
$76.88/ea $46.39/1 per ea only $46.39/eaSave 40%

Usually ships within 3-5 business days

SKU: TWE171115-002 Categories: ,

OVERVIEW

Precision Wire Feeding for Industrial MIG Welding

The ESAB 171115-002 Drive Roll is a critical component for maintaining the efficiency and reliability of your MIG welding operations. Designed specifically for use with .035-inch (0.9mm) solid welding wires, this drive roll features a precision-machined V-Groove profile. Unlike knurled rolls used for flux-cored wires, the smooth V-groove design provides optimal traction on solid mild steel and stainless steel wires without biting into the surface or deforming the wire's roundness. This ensures that the wire passes through the liner and contact tip smoothly, maintaining excellent electrical conductivity and arc stability.

Manufactured from high-grade hardened steel, this drive roll is built to withstand the rigors of continuous industrial use. Wear on drive rolls is a common cause of erratic feeding, slipping, and arc stuttering. By replacing worn rolls with this genuine ESAB/Tweco part, operators can restore the factory-specified performance of their wire feeders. This particular model is widely compatible with the Thermal Arc Fabricator series (181i, 211i, 252i) and select ESAB Rebel units that utilize the same feed mechanism architecture.

Proper tensioning is vital in MIG welding, but a high-quality drive roll reduces the need for excessive pressure. The 171115-002 grips the wire firmly at lower tension settings, which helps prevent motor strain and reduces the accumulation of metal shavings inside the feeder. Whether you are fabricating structural steel or performing precision automotive repairs, ensuring your wire delivery system is equipped with the correct drive roll size and type is the first step toward a defect-free weld.

Key Technical Benefits

  • Optimized Geometry: The V-groove is strictly dimensioned for .035" wire, preventing the wandering that occurs with oversized grooves.
  • Durability: Heat-treated steel construction resists grooving and wear over time.
  • System Compatibility: engineered to fit seamlessly onto the drive shafts of specific Tweco and Thermal Arc feeders.
Additional Information
Packaging Description:1 Per Ea
Wire Diameter:0.035" (0.9 mm)
Groove Type:V-Groove
Wire Type:Solid Wire
Compatible Machines:ESAB Rebel Series, Thermal Arc Fabricator 181i, Thermal Arc Fabricator 211i, Thermal Arc Fabricator 252i
Material:Hardened Steel
Application:Mild Steel, Stainless Steel
----- new values below ----
Compatible Machines:Thermal Arc Fabricator 181i, Thermal Arc Fabricator 211i, Thermal Arc Fabricator 252i, ESAB Rebel Series
Material:Hardened Steel
Application:Mild Steel, Stainless Steel
Wire Diameter:0.035" (0.9 mm)
Groove Type:V-Groove
Wire Type:Solid Wire
Packaging Description:1 Per Ea

INCLUDED

  • 1 x V-Groove Drive Roll for .035" (0.9mm) Wire

APPLICATIONS

  • MIG Welding with Solid Mild Steel Wire
  • MIG Welding with Stainless Steel Wire
  • Automotive Body Repair
  • Light to Medium Industrial Fabrication
  • Maintenance and Repair Operations (MRO)

FAQ

This drive roll is designed specifically for .035-inch (0.9mm) diameter welding wire.

V-Groove drive rolls are designed for solid wires, such as mild steel (ER70S-6) and stainless steel. They should not be used for flux-cored wire, which requires knurled rolls.

Yes, the 171115-002 is the correct drive roll for the Thermal Arc Fabricator 181i, 211i, and 252i series when using .035" solid wire.

Slippage can occur if the tensioner is too loose, the liner is clogged, or the contact tip is worn. Ensure the drive roll size matches your wire size exactly.

No, aluminum wire typically requires U-Groove drive rolls to prevent deformation of the soft aluminum. This V-Groove roll is for harder metals like steel.

Replace drive rolls if the groove edges become rounded, if you notice metal shavings accumulating under the rolls, or if you cannot get consistent feeding without overtightening the tensioner.

This item is sold individually (1 per each). If your machine requires a two-roll system, you may need to purchase two units depending on the specific feeder configuration.

In this context, it typically refers to the specific series or style of the roll within the ESAB/Tweco catalog, often denoting compatibility with specific 'Double Smooth' or standard feed systems, though the 'V' confirms the V-Groove profile.

Related products