The Tweco Spray Master MS250 (SKU: 1023-1141) is a premium air-cooled MIG gun designed for medium to heavy-duty industrial fabrication. Rated at 250 Amperes at an 80% duty cycle with CO2 shielding gas, this torch provides exceptional thermal management and electrical conductivity. The 'MS212E3545' configuration indicates a Master Series 250A platform, a 12-foot cable assembly, a Euro-Kwik rear connection, and a liner setup for 0.035" to 0.045" (0.9mm - 1.2mm) welding wires.
Technically, the Spray Master series distinguishes itself through its simplified internal geometry and robust conductor tube design. The conductor tube is insulated with a metal jacket, providing superior impact resistance compared to standard fiberglass-wrapped tubes. The cable assembly utilizes high-grade copper stranding optimized for current transfer, minimizing voltage drop over the 12-foot length. The Euro-Kwik connection ensures a secure, gas-tight interface with the wire feeder, transmitting welding current, shielding gas, and trigger signals through a single unified connector block, which is standard on many ESAB and European-manufactured power sources.
Maintenance and consumable management are streamlined by the use of standard Tweco consumables. The front end utilizes the 11 Series contact tips, 52 Series gas diffusers, and 22 Series nozzles. The nozzle housing is constructed from aircraft-grade aluminum, which dissipates heat rapidly, prolonging the life of the front-end parts. The trigger mechanism is a heavy-duty mechanical switch designed to withstand thousands of cycles in harsh industrial environments. This gun is engineered for fabrication shops requiring a balance between maneuverability and high-amperage capability.
| Additional Information |
|---|
| Amperage:250 A |
| Cable Length:12 ft |
| Wire Diameter:0.035", 0.045" |
| Cooling Method:Air Cooled |
| Series:Spray Master |
| Connection Type:Euro-Kwik |
| Duty Cycle:80% @ 250A |
| Process:Flux Cored (FCAW), MIG (GMAW) |
