Skip to Main Content
Canadian
Canadian owned and operated

85Z17 - WP-12 Series 5/32 Inch TIG Collet

Packaging: 5 pc per pack
$42.89/ea $138.05/5 pc per pack only $27.61/eaSave 36%

Usually ships within 3-5 business days

SKU: 85Z17 Categories: ,

OVERVIEW

Technical Overview of the 85Z17 WP-12 Collet

The 85Z17 Collet is a critical consumable component designed exclusively for the WP-12 series of TIG welding torches. This specific collet is engineered to accommodate tungsten electrodes with a diameter of 5/32 inch (approximately 4.0mm), a size typically reserved for heavy-duty industrial applications requiring high amperage. The WP-12 torch platform is a water-cooled system rated for up to 500 amps, and the 85Z17 collet is manufactured to withstand the intense thermal and electrical stresses associated with this power level.

Manufactured from high-grade tellurium copper or similar conductive alloys, this collet ensures minimal electrical resistance at the contact point between the power cable assembly and the tungsten electrode. Proper current transfer is essential in high-amperage TIG welding to prevent overheating of the torch head and to maintain a stable, focused arc. The split-design of the collet allows it to compress against the tungsten when the back cap is tightened, securing the electrode in place and ensuring consistent stick-out length during operation.

Compatibility is strictly limited to the WP-12 series torch bodies. Unlike the more common 17/18/26 series or the 9/20 series, the WP-12 utilizes a unique consumable ecosystem due to its heavy-duty construction. Operators must ensure they are using the corresponding WP-12 collet body and nozzle to ensure proper gas flow and mechanical fitment. Regular inspection of the 85Z17 collet is recommended; signs of wear such as elongation, twisting, or arc burns on the contact surfaces indicate the need for immediate replacement to preserve torch integrity and weld quality.

In industrial settings, such as pipe welding, aerospace, and heavy fabrication, the reliability of the collet directly impacts downtime. The 85Z17 provides the robust performance required for continuous welding on thick aluminum and steel sections, ensuring that the full 500-amp capacity of the WP-12 torch can be utilized effectively.

Additional Information
Packaging Description:1 Per Ea, 5 pc per Pack
Item:Collet
Brand:Generic
Style/Amps/Cooling:12/500amps/Water Cooled
Diameter:4.0mm
Torch Compatibility:Water-Cooled 500A Torches, WP-12 Series
Material:Tellurium Copper
Part Type:Standard Collet
----- new values below ----
Tungsten Diameter:5/32" (4.0mm)
Torch Compatibility:WP-12 Series, Water-Cooled 500A Torches
Material:Tellurium Copper
Part Type:Standard Collet
Item:collet
Style/Amps/Cooling:12-500amps-water-cooled
Diameter:4-0mm
Packaging Description:1-per-ea

INCLUDED

  • (1) 85Z17 5/32" Collet for WP-12 Torches

APPLICATIONS

  • Heavy Industrial Fabrication
  • Shipbuilding and Marine Repair
  • Aerospace Component Welding
  • Thick-Walled Pipe Welding
  • Aluminum Casting Repair
  • Structural Steel Welding
  • High-Amperage TIG Applications (up to 500A)

FAQ

The 85Z17 collet is designed specifically for the WP-12 series of TIG torches. It is not compatible with WP-17, WP-18, WP-26, WP-9, or WP-20 torches.

This collet is sized for 5/32 inch (4.0mm) tungsten electrodes.

The WP-12 is a heavy-duty water-cooled torch, typically rated for up to 500 amps.

You should replace the collet if you notice arc instability, if the tungsten slips even when tightened, or if the collet appears twisted, discolored, or burnt.

No, collets are size-specific. You must use a collet that matches the diameter of your tungsten electrode. Using a 5/32" collet with smaller tungsten will result in no grip and poor electrical contact.

It is typically manufactured from a high-conductivity copper alloy, such as tellurium copper, to withstand high amperage and heat.

Yes, you must use a WP-12 compatible collet body. The front-end parts of the WP-12 are unique to that series.

5/32" tungsten is used for high-amperage welding on thick materials, where smaller tungsten would melt or degrade too quickly.