Skip to Main Content

57Y01MF - Weldcraft A-150 Replacement Power Cable 12.5ft Monoflex

Packaging: 1 per ea
$291.02/ea $206.40/1 per ea only $206.40/eaSave 29%

Usually ships within 3-5 business days

SKU: MIL57Y01MF Categories: , ,

OVERVIEW

Genuine Weldcraft 57Y01MF Power Cable for A-150 TIG Torches

The Weldcraft 57Y01MF is a premium replacement power cable designed specifically for the A-150 (formerly WP-17) series of air-cooled TIG torches. As a critical component of your welding assembly, this cable serves the dual purpose of transmitting welding current to the torch head while simultaneously delivering shielding gas to the weld zone. This 'one-piece' cable design is standard for many air-cooled setups, simplifying the connection to the power source and reducing bulk.

What sets the 57Y01MF apart is its Monoflex™ construction. Unlike basic vinyl cables that can become stiff in cold environments or soften excessively under heat, Monoflex utilizes a braided rubber composition. This material engineering results in a cable that maintains consistent flexibility across a wide temperature range. For the professional welder, this translates to reduced wrist fatigue during long welding sessions, as the cable moves fluidly with the torch rather than fighting against the operator's hand movements. The braided exterior also offers enhanced durability against abrasion, sparks, and hot surfaces common in industrial workshops.

This 12.5-foot (3.8-meter) cable features high-quality threaded mechanical connections at both ends, ensuring a leak-free gas seal and a low-resistance electrical contact. It is rated for the full 150-amp capacity of the A-150 torch series. Whether you are repairing a damaged torch or upgrading from a stiffer vinyl hose, the Weldcraft 57Y01MF restores the performance and handling characteristics that professional fabricators expect from Miller and Weldcraft equipment. Proper maintenance of your power cable, including checking for cuts or gas leaks, is essential for maintaining weld quality and shielding gas coverage.

Key Technical Specifications:

  • Model: 57Y01MF
  • Length: 12.5 Feet (3.8 Meters)
  • Material: Monoflex Braided Rubber
  • Compatibility: A-150 (WP-17) Air-Cooled Torches
  • Type: 1-Piece Power/Gas Cable
Additional Information
Brand:Weldcraft
Length:12.5 ft
Item:Power Cable
Style/Amps/Cooling:17 / 150 Amps / Air Cooled
Packaging Description:1 per each
Torch Type:Air Cooled, TIG
Material:Monoflex Braided Rubber
Compatible Brand/Model:Weldcraft A-150, WP-17 Series
Connection Type:Threaded Mechanical
Cable Length:12.5 ft

INCLUDED

  • 1 x Weldcraft 57Y01MF Monoflex Power Cable (12.5 ft)

APPLICATIONS

  • Replacement of damaged power cables on A-150 (WP-17) TIG torches
  • Upgrading standard vinyl cables to flexible braided rubber
  • General fabrication and maintenance welding
  • Automotive and motorsports TIG welding applications
  • Aerospace and precision tube welding setups

FAQ

The 57Y01MF is designed specifically for the Weldcraft A-150 series, commonly known as the WP-17 air-cooled TIG torch.

This is a 1-piece power cable, meaning the electrical conductor runs inside the gas hose, combining power and gas delivery into a single line.

Monoflex cables are made from braided rubber, which offers significantly higher flexibility and heat resistance compared to stiffer standard vinyl cables.

The 57Y01MF is 12.5 feet (approximately 3.8 meters) long.

No, this is the power cable assembly only. The torch head and other consumables are sold separately.

This cable typically connects to the welder using a power block adapter (DINSE or stud connector) depending on your machine's output terminal. Ensure you have the correct adapter for a 1-piece cable.

No, the 57Y01MF is designed strictly for air-cooled torches (specifically the A-150/WP-17). Water-cooled torches require a 3-hose setup.

It is rated to match the A-150 torch capacity, which is 150 Amps at 60% duty cycle.