Skip to Main Content

53G707 - Alustar 200 Heavy Duty Aluminum Cleaner and Degreaser 20L

Packaging: 1 per each
$275.30/ea $199.59/1 per each only $199.59/eaSave 28%

Usually ships within 3-5 business days

SKU: 53G707 Categories: ,

OVERVIEW

High-Efficiency Cleaning for Sensitive Alloys

The Walter Alustar 200 is a premier alkaline cleaner and degreaser engineered specifically to address the challenges of cleaning aluminum and other non-ferrous alloys. Supplied in a substantial 20L pail, this solution is a staple for industrial facilities requiring rigorous cleaning standards without compromising the integrity of softer metals. Its formulation is built upon Low Energy Surfactant Technology, which enables the fluid to achieve superior cleaning results even at lower operating temperatures. This feature not only reduces energy consumption for heating cleaning baths but also accelerates the cleaning cycle, enhancing overall operational throughput.

One of the standout technical characteristics of Alustar 200 is its demulsifying capability. Unlike standard detergents that emulsify oil and grease into the solution—eventually saturating it and requiring frequent change-outs—Alustar 200 lifts contaminants and allows them to float to the surface. This separation enables oil skimmers to effectively remove waste, significantly extending the lifespan of the cleaning bath and reducing waste disposal costs. Furthermore, the product is low-foaming, making it the ideal choice for high-pressure spray cabinets, automated parts washers, and ultrasonic tanks where foam buildup can impede performance.

Safety and compliance are at the forefront of the Alustar 200 design. It is NSF category A8 registered, permitting its use in and around food processing areas (where not used for direct food contact). The formula is biodegradable and free from volatile organic compounds (VOCs), solvents, phosphates, and silicates, aligning with modern environmental standards. Additionally, integrated corrosion inhibitors provide a temporary protective layer on cleaned parts, preventing flash rusting during drying or short-term storage. With a high concentration allowing for dilution ratios up to 1:200, this 20L supply offers exceptional value and longevity for high-volume industrial cleaning operations.

Additional Information
packaging-description:1 per each
----- new values below ----
Container Size:20L
NSF Certification:Category A8
Dilution Ratio:Up to 1:200
pH Level:Alkaline
Biodegradable:Yes
Brand:Walter
Product:Cleaner, Degreaser
Format:Liquid
Packaging Description:20L Pail

INCLUDED

  • 1x 20L Pail of Alustar 200 Cleaner/Degreaser

APPLICATIONS

  • Cleaning aluminum and non-ferrous metal parts without etching
  • Automated and semi-automated hot parts washers
  • Ultrasonic baths and cleaning tunnels
  • Turntable washers and spray cabinets
  • Removing cutting oils, grease, and lubricants after machining
  • General maintenance cleaning in industrial environments
  • Pre-cleaning parts prior to welding or coating

FAQ

Alustar 200 is highly concentrated and can be diluted with water up to 1:200, depending on the severity of the soil and the cleaning method used.

Yes, Alustar 200 is specifically formulated to be safe for aluminum and other non-ferrous alloys, cleaning them effectively without causing damage or staining.

No, it is a low-foaming detergent, making it ideal for high-pressure spray cabinets, automated parts washers, and ultrasonic baths.

Walter Alustar 200 is NSF category A8 registered (Registration #145452), suitable for use in degreasing and carbon removal in food processing establishments.

Yes, it contains corrosion inhibitors that help prevent flash rusting on metal parts immediately after cleaning.

Yes, it is biodegradable and free from VOCs (Volatile Organic Compounds), solvents, phosphates, and silicates.

Absolutely. Its low-foam and demulsifying properties make it an excellent choice for ultrasonic cleaning applications.

CATALOGUE & SPEC SHEETS

Safety Data Sheet