Skip to Main Content
Canadian
Canadian owned and operated

0349090886 - ESAB FS002 Analog TIG Foot Pedal - 5m Cable

Packaging: pack of 1

Sorry, product has been discontinued by the vendor.

OVERVIEW

Technical Overview of the ESAB FS002 Analog Foot Control

The ESAB FS002 Analog Foot Control (SKU: 0349090886) is a specialized remote control device designed for use with compatible ESAB TIG welding power sources. This unit utilizes an analog signal interface to provide linear current regulation, allowing the operator to vary the welding output remotely during operation. The device is engineered to interface seamlessly with the control circuits of specific ESAB machines, translating mechanical pedal displacement into a corresponding voltage signal that adjusts the power source's output amperage.

Physically, the FS002 is constructed with a durable metallic chassis designed to withstand the rigors of industrial environments. It features a low-profile form factor that accommodates the natural angle of the operator's foot, minimizing strain during extended welding sessions. The internal potentiometer is selected for high resolution and smooth travel, ensuring that there are no dead spots or sudden jumps in the current output. This precision is critical for applications requiring exacting heat input control, such as aerospace or pressure vessel welding.

The unit comes equipped with a 5-meter (approximately 16.4 feet) control cable, terminated with the appropriate connector for ESAB analog remote sockets. This length provides sufficient range for the welder to operate at a distance from the power source, facilitating work on large assemblies or in fixtures where the machine cannot be placed immediately adjacent to the weld zone. The cable is shielded to prevent interference from high-frequency start signals often used in TIG welding processes.

Installation is straightforward, requiring only the connection of the plug to the remote socket on the front panel of the power source. Once connected, the machine typically detects the remote and switches control logic to the pedal, enabling the start/stop function via the integrated microswitch and amperage control via the pedal depression.

Additional Information
Packaging Description:pack of 1
Item:Foot Control
Cable Length:5 Meters, 5m
Accessory Type:Remote Control
Signal Type:Analog
Process:TIG
----- new values below ----
Accessory Type:Remote Control
Signal Type:Analog
Process:TIG
Cable Length:5 Meters
Brand:ESAB
Item:Foot Control
Cable Length:5m

INCLUDED

  • 1 x FS002 Analog Foot Control Pedal
  • 1 x 5-Meter Connection Cable
  • 1 x Connector Plug (Attached)

APPLICATIONS

  • Precision TIG welding of aluminum and stainless steel
  • Aerospace and motorsports fabrication
  • Pipe welding requiring crater filling control
  • Benchtop welding stations
  • Production environments requiring remote amperage adjustment

FAQ

The FS002 comes with a 5-meter (approx. 16.4 ft) cable attached.

This is the Analog version (ANLG) of the FS002 foot control.

No, it is designed for ESAB machines that accept analog remote controls. Always check your machine's manual for compatibility with the FS002 Analog model.

Yes, the pedal activates the arc start (contactor) and controls the amperage based on how far you press it.

Yes, the unit is designed with a stable base to prevent sliding on workshop floors.

While technically possible on some machines to control amps, foot pedals are primarily designed for and used with the TIG welding process.

No, the pedal is powered directly by the control voltage from the welding machine through the connection cable.

It has a moderate weight to ensure stability but is light enough to be easily repositioned around the shop.