Canadian owned and operated
The Exocor Executive ER410NiMo TIG Welding Rod is a specialized filler metal designed for the high-integrity welding of martensitic stainless steels. Specifically formulated to match the chemistry and mechanical properties of ASTM CA6NM castings, this alloy is widely utilized in the power generation and heavy industrial sectors. Unlike standard 410 stainless steel, the 410NiMo grade incorporates nominal additions of Nickel (4.5%) and Molybdenum (0.5%). These alloying elements fundamentally alter the microstructure, significantly improving the toughness and ductility of the weld deposit while maintaining high strength and corrosion resistance.
This 1/8" (3.2mm) diameter rod is produced to Exocor's exacting "Executive" standards, ensuring a clean surface finish free from contaminants that could introduce porosity or inclusions. It is the preferred choice for fabricating and repairing critical components such as hydro turbine runners, steam turbine diaphragms, valves, and pumps. The rod produces a martensitic microstructure that responds well to heat treatment, although strict adherence to thermal cycles is required to prevent hardening issues.
Welding with ER410NiMo requires careful control of thermal conditions to ensure the integrity of the joint. Preheating the base material is typically required to minimize thermal shock and cracking susceptibility. Furthermore, post-weld heat treatment (PWHT) is essential for this alloy. As noted in the technical specifications, the final PWHT temperature should not exceed 1150°F (620°C). Exceeding this critical temperature range can cause the reformation of untempered martensite upon cooling, which compromises the ductility and toughness gained during the tempering process. When used correctly, Exocor Executive 410NiMo delivers X-ray quality welds with excellent resistance to cavitation and erosion.
| Additional Information |
|---|
| Packaging Description:10lb tube |
| Weld Process:TIG |
| AWS Spec :ER410, ER410NiMo |
| Packaging:10lb tube |
| Grade:410, 410NiMo |
| Diameter:3.2mm |
| Polarity:DC+ |
| Brand:Exocor |
| Material Composition:Martensitic Stainless Steel |
| Length :36" |
| Shielding Gas Requirement:100% Argon |
| Applications:CA6NM Castings, Hydro Turbines, Pumps, Valves |
| Welding Position:All Position |
| ----- new values below ---- |
| Material Composition:Martensitic Stainless Steel |
| Length:36" |
| Shielding Gas Requirement:100% Argon |
| Applications:Hydro Turbines, Valves, Pumps, CA6NM Castings |
| Welding Position:All Position |
| Brand:Exocor |
| Diameter:3.2mm |
| Grade:410NiMo |
| Packaging:10lb tube |
| Weld Process:TIG |
| AWS Spec:ER410NiMo |
