S249419-029 - Hobart FabCOR 86R 1/16" Metal-Cored Welding Wire - 33 lb Spool

Optimize Production with Hobart FabCOR 86R Metal-Cored Wire

For industrial operations seeking to maximize throughput and efficiency in heavy fabrication, the Hobart FabCOR 86R is a premier choice in the metal-cored wire category. This 1/16-inch diameter wire, supplied in a standard 33 lb spool, is engineered to deliver high deposition rates that significantly outperform solid wires and traditional flux-cored options in specific applications. Designed for the welding of mild and low-alloy steels, FabCOR 86R combines the high travel speeds of solid wire with the forgiving nature of flux-cored consumables, making it an indispensable asset for structural steel fabrication, heavy equipment manufacturing, and railcar construction.

The FabCOR 86R is classified under AWS E70C-6M H4, indicating its superior mechanical properties and low hydrogen content, which is critical for minimizing the risk of cracking in critical structures. One of the standout features of this wire is its high transfer efficiency, often exceeding 95%. This means that virtually all the wire fed into the puddle becomes part of the weld, reducing waste and lowering overall consumable costs. Furthermore, the wire is formulated to operate with Argon-rich shielding gas mixtures (typically 75-95% Argon with a CO2 balance), which promotes a stable, spray-transfer like arc that is smooth and easy to control.

At Josef Gas, we understand that downtime for cleanup is lost revenue. The Hobart FabCOR 86R addresses this with its low spatter generation and minimal slag formation. Unlike flux-cored wires that require chipping between passes, metal-cored wires often leave a clean surface that is ready for painting or subsequent passes immediately, streamlining your workflow. Its ability to bridge gaps and handle light rust or mill scale further enhances its utility in real-world shop environments where joint preparation may not always be perfect.

Key Industrial Benefits

• High Deposition Rates: Increases travel speed and productivity on heavy sections.
• Minimal Cleanup: Very low spatter and little to no slag reduce post-weld grinding.
• Cost Efficiency: High electrode efficiency means you buy less wire for the same amount of deposited weld metal.
• Versatility: Excellent performance on both clean and scaled steel plates.